ITO Glass Substrates (Unpatterned) [S111, S2006B1, S281]_Ossila - 코아사이언스

안녕하세요!

Material Science 전문제조사 Ossila Ltd 수입/공급 업체 코아사이언스 입니다.

 

자세한 상품 정보 및 관련 문의는 전화 02-858-0328 또는 info@coresciences.co.kr로 문의주시기 바랍니다.

감사합니다!

 

ITO Glass Substrates (Unpatterned)

Cat.#            Dimensions                                          Pack size

S111            15mm x 20mm                                     100

S2006B1       25mm x 25mm                                     100

S281            25mm x 75mm (Microscope Slide)           20, 100

 

These glass substrates are coated with a 100 nm layer of Indium Tin Oxide (ITO).

Useful for a variety of experimental techniques including microscopy (STM, conductive AFM), spectroscopy and electropolymerisation.

---

Specifications

Substrate sizes	20mm x 15mm 25mm x 25mm 25mm x 75mm (Microscope Slide)
Thickness	1.1 mm
Glass type	Polished soda lime, float glass
Substrate coating	Fully oxidized ITO
ITO thickness	100 nm
ITO quoted resistance	20 Ω.□-1
ITO measured resistance*	14 - 16 Ω.□-1
Glass roughness	1 nm RMS (by AFM)
ITO roughness	1.8 nm RMS (by AFM)

 *Resistances measured using the Ossila Four-Point Probe System.

Please note that Ossila does not currently offer custom substrate sizes. We may offer additional sizes in the future based on demand. 

---

Characterisation

Left: 10 µm x 10 µm AFM scan with Z-scale of ±5 nm. Right: AFM of glass surface (1 µm x 1 µm x 3.5 nm).

 

Transmittance of ITO substrates.

 

---

To the best of our knowledge, the technical information provided here is accurate. However, Ossila assume no liability for the accuracy of this information. The values provided here are typical at the time of manufacture and may vary over time and from batch to batch.

 

코아사이언스 coresciences Ossila Ltd UK 영국 한국 Korea distributor Top OFET Products Top OLED Products Top OPV Products Nanotubes Graphene Perovskite Product 페로브스카이트 Organic Electronics Semiconducting Polymers 반도체 중합체 반도체 고분자 Luminosyn OLED, OPV, Perovskite, OFET Sensing Graphene 그래핀