2PACz [M2425A1][CAS no. 20999-38-6]_Ossila - 코아사이언스

안녕하세요!

Material Science 전문제조사 Ossila Ltd 수입/공급 업체 코아사이언스 입니다.

 

자세한 상품 정보 및 관련 문의는 전화 02-858-0328 또는 info@coresciences.co.kr로 문의주시기 바랍니다.

감사합니다!

2PACz

Cat.# M2425A1 / Size: 500mg, 1g

Electron / Hole Transport Layer Materials, Materials, Perovskite Interface Materials, Perovskite Materials, Self-Assembled Monolayers (SAMs), Semiconducting Molecules

*Cat.# 및 세부사양은 제조사 Lot.# 재고 상황에 따라 수시 변동 될 수 있습니다.

Self-Assembled Monolayer with Carbazole-based Phosphonic Acid

Hole transport or extraction layer for highly efficient NFA-polymer solar cells and p-i-n perovskite solar cells, CAS No. 20999-38-6

​

2PACz ((2-(9H-carbazol-9-yl)ethyl)phosphonic acid) is a bench-mark self-assembled monolayer (SAM) material that consists of an electron rich carbazole body with an ethyl phosphonic acid anchoring group as hole selective layer (HSL) interface for inverted perovskite solar cells.

This material acts as HSL by self-assembling on the surface of indium-tin-oxide (ITO) substrates in organic solar cells and perovskite solar cells. It can also replace PEDOT:PSS as hole transport or extracting layer material. As an interface layer, 2PACz changes the work function of ITO while altering the morphology of active layer materials.

In perovskite solar cells, 2PACz exhibits a well-suited energetic alignment and significantly reduces non-radiative recombination at the contact/perovskite interface, outperforming those based on benchmark hole transport layer materials. This self-assembled monolayer has a better band alignment to the valence band of the perovskite absorber, compared to commonly used HTL PTAA.

The use of 2PACz has enabled almost lossless contacts, minimum interfacial recombination, and improved power conversion efficiency in single-junction and tandem solar cells. 2PACz causes spontaneous vertical phase separation of photoreactive layers, forming a vertical component distribution to improve carrier yield-mobility, and suppress the trap-assisted recombination and leaking current in indoor OPVs.

World-record high efficiency of 20.17% (19.79% certified, published on 21 March 2024) was achieved for organic polymer non-fullerene solar cells by engaging 2PACz as the self-assembled interlayer (SAI) to form a a thin layer of 2–6 nm, enabling a full coverage on the substrate (not a monolayer but few layers coverage) [1].

Serving as hole selective contact for organic solar cells and perovskite solar cells, 2PACz is an alternative to PEDOT:PSS with superior performance with the convenience of solution deposition at low concentration, i.e. 1 mM.

​

Solution Processing Procedure

Typical processing solvents: ethanol, methanol, THF, IPA, DMF

Typical concentration: 1 mM (0.275 mg/ml) or 1.0 mg/ml (1 mg 2PACz is dissolved in 1 ml ethanol)

Typical processing procedure: 100 uL of 2PACz solution is deposited onto the centre of the substrate surface and spin-coated for 30 s at the speed of 3000 rpm. The coated substrate is then cooled to room temperature after being annealed annealing for 10 min at 100 ℃.

​

General Information

CAS Number	20999-38-6
Chemical Formula	C14H14NO3P
Molecular Weight	275.24 g/mol
Absorption*	λmax 340 nm (on ITO glass)
Fluorescence	λem (n.a.)
HOMO/LUMO	HOMO = 5.6 eV, LUMO = 2.1 eV [2]
Synonyms	(2-(9H-carbazol-9-yl)ethyl)phosphonic acid
Classification or Family	Carbazole derivatives, Self-assembly monolayers, Hole transport layer, Hole extraction layer, p-i-n Perovskite solar cells, Organic photovoltaics

Product Details

Purity	> 98% (1H NMR)
Melting Point	Tm = 231 ° C
Appearance	Off-white powder/crystals

MSDS Documentation

​2PACz MSDS Sheet

​

Literature and Reviews

1. Self-Assembled Interlayer Enables High-Performance Organic Photovoltaics with Power Conversion Efficiency Exceeding 20%, S. Guan et al., Adv. Mater., 2400342 (2024); DOI: 10.1002/adma.202400342.
2. Advantages and challenges of self-assembled monolayer as a hole-selective contact for perovskite solar cells, S. Wang et al., Mater. Futures. 2, 012105 (2023); DOI: 10.1088/2752-5724/acbb5a.
3. Self-Assembled Monolayer Enables Hole Transport Layer-Free Organic Solar Cells with 18% Efficiency and Improved Operational Stability, Y. Lin et al., ACS Energy Lett. , 5 (9), 2935–2944 (2020); DOI: 10.1021/acsenergylett.0c01421.
4. Record indoor performance of organic photovoltaics with long-term stability enabled by self-assembled monolayer-based interface management, T. Kim et al., Nano Energy, 112, 108429 (2023); DOI: 10.1016/j.nanoen.2023.108429.
5. Evaporated Self-Assembled Monolayer Hole Transport Layers: Lossless Interfaces in p-i-n Perovskite Solar Cells, A. Farag et al., Adv. Energy Mater., 13 (8), 2203982 (2023); DOI: 10.1002/aenm.202203982.
6. Fully Textured, Production-Line Compatible Monolithic Perovskite/Silicon Tandem Solar Cells Approaching 29% Efficiency, L. Mao et al., Adv. Mater., 34 (40), 2206193 (2022); DOI: 10.1002/adma.202206193.
7. Monolithic All-Perovskite Tandem Solar Cells with Minimized Optical and Energetic Losses, K. Datta et al., Adv. Mater., 34 (11), 2110053 (2022); DOI: 10.1002/adma.202110053.
8. Non-Fused Ring Acceptors Achieving over 15.6% Efficiency Organic Solar Cell by Long Exciton Diffusion Length of Alloy-Like Phase and Vertical Phase Separation Induced by Hole Transport Layer, D. Luo et al., Adv. Energy Mater., 13 (6), 2203402 (2023); DOI: 10.1002/aenm.202203402.

관련 상품

[PDMS Film/Polydimethylsiloxane Flm/폴리다이메틸실록산 필름] PDMS sheet (Ultra-thin) [CSCPD1001, CSCPD1502, CSCPD5015, CSCPD10015, CSCPD10001, CSCPD20015, CSCPD1501, CSCPD15015, CSCPD501]

코아사이언스 coresciences Ossila Ltd UK 영국 한국 Korea distributor Top OFET Products Top OLED Products Top OPV Products Nanotubes Graphene Perovskite Product 페로브스카이트 Organic Electronics Semiconducting Polymers 반도체 중합체 반도체 고분자 Luminosyn OLED, OPV, Perovskite, OFET Sensing Graphene 그래핀